Page 1 of 2

Revolution pi core

Posted: 28 Oct 2018, 17:33
by kiskaprince
I bought rev pi core from someone
It worked for first time no problem I got login etc ,desktop
After few restarts I cant use startx and I cant see nothing on my monitor connected via micro HDMI
I get this every time
Please help
Thank you

login as: pi
pi@192.168.2.254's password:

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Sun Oct 28 12:10:18 2018
pi@RevPi6262:~ $ startx


X.Org X Server 1.18.4
Release Date: 2016-07-19
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.4.26-v7+ armv7l Raspbian
Current Operating System: Linux RevPi6262 4.4.50-rt66+ #1 PREEMPT RT Wed, 20 Sep 2017 07:09:15 +0200 armv6l
Kernel command line: bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 dma.dmachans=0x7f35 bcm2708.boardrev=0x11 bcm2708.serial=0xd15e8568 bcm2708.uart_clock=48000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait nosplash smsc95xx.macaddr=c8:3e:a7:00:2a:8c quiet splash plymouth.ignore-serial-consoles
Build Date: 11 November 2016 11:59:59AM
xorg-server 2:1.18.4-2+rpi1 (https://www.debian.org/support)
Current version of pixman: 0.33.3
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/home/pi/.local/share/xorg/Xorg.1.log", Time: Sun Oct 28 12:11:56 2018
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE)
Fatal server error:
(EE) parse_vt_settings: Cannot open /dev/tty0 (Permission denied)
(EE)
(EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
(EE) Please also check the log file at "/home/pi/.local/share/xorg/Xorg.1.log" for additional information.
(EE)
(EE) Server terminated with error (1). Closing log file.
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error
Couldn't get a file descriptor referring to the console
pi@RevPi6262:~ $ /home/pi/.local/share/xorg/Xorg.1.log
-bash: /home/pi/.local/share/xorg/Xorg.1.log: Permission denied
pi@RevPi6262:~ $

Re: Revolution pi core

Posted: 29 Oct 2018, 07:30
by dirk
Hi, you cannot start the graphical desktop on a SSH terminal session. To use the graphical desktop you have the following options
1) connect direct: via a HDMI monitor, login and then type "startx"
2) connect remote: configure boot to graphical desktop via WebStatus
Then you may configure remote access via TeamViewer, VNC, etc.

Re: Revolution pi core

Posted: 29 Oct 2018, 09:40
by kiskaprince
Yes I did that worked first few times and then stops and I cant see nothing on the monitor just black screen
Thank you for your help
Before I could see loading everything before it went to desktop now nothing

Re: Revolution pi core

Posted: 29 Oct 2018, 10:33
by kiskaprince
I got team viewer
Now when I put pi and the password from the Revpi it doesnt except
Please help
Thank you

Re: Revolution pi core

Posted: 29 Oct 2018, 12:54
by dirk
Hi, the TeamViewer credentials are not the same as on the sticker on the RevPi. Please have a look at the tutorial how to setup TeamViewer. You may also have a look at the video tutorial Tutorial 24 – TeamViewer-RevPi Beta. It is available with English subtitles.
If you have problems with the graphical desktop then the TeamViewer installation will not fix this problem. So there is an error which seams to be related to permissions

Code: Select all

Fatal server error: (EE) parse_vt_settings: Cannot open /dev/tty0 (Permission denied)
I am no expert for this topic but here I found a possible solution for this problem.
Maybe the user "pi" has to be added to the user group "tty":

Code: Select all

sudo usermod -a -G tty pi

Re: Revolution pi core

Posted: 30 Oct 2018, 00:29
by kiskaprince
sudo raspi-config

This is very useful command
Thank you for that link
All working now
Just curious if is it possible to installwin10 core lot on this revpi core?

Re: Revolution pi core

Posted: 30 Oct 2018, 07:39
by dirk
Hi, good to hear that you have solved your problems. Currently we don't have plans to support Windows on the RevPi. Have a look at this discussion: Windows 10 IoT core.

Re: Revolution pi core

Posted: 30 Oct 2018, 09:30
by kiskaprince
Thank you
One more thing
When I connect to a computer by micro USB it doesn't get recognize as a drive
I just doesn't show
Is there a command to run to be able to see it after?

Re: Revolution pi core

Posted: 30 Oct 2018, 09:47
by dirk
Hi, yes there are some steps to take, have a look at this tutorial: Saving and installing images.
And if you prefer watching instead of reading, have a look at: Video Tutorial 01 – Creation of an image.

Re: Revolution pi core

Posted: 30 Oct 2018, 10:30
by kiskaprince
Yes thank you
But the rpiboot doesnt recognize it either it shows waiting forever
Maybe I am missing something?
Thanks