The Industrial Raspberry Pi Forum

Hallo Zusammen,

ich möchte einen RevPi wie eine SPS verwenden.
Ist es möglich auf dem RevPi ein CODESYS Control Laufzeitsystem (da für alle Raspberry Pi Modelle) zu verwenden?


Mit freundlichen Grüßen
Teefan

Hallo es is möglich.

Reference : https://revolution.kunbus.de/tutorials/ ... einbinden/

Thank you for your answer.
I use a RevPi Core3. I have installed the the CODESYS Control for Raspberry Pi in the PackageManager of CODESYS. Unfortunately I do not find under Tools-->Update Raspberry Pi.
Had someone the same problem and how solved it?

Best regards
Teefan

Hi Teefan,
Check in Tools->Package Manager if CODESYS Control for Raspberry PI is installed.
Check the versions of CODESYS Development System V3 and CODESYS Control for Raspberry PI .Some installation problem might have perhaps occurred at your side and you can otherwise try with a fresh install.

https://store.codesys.com/codesys.html#All%20versions
https://store.codesys.com/codesys-contr ... 20versions

Regards,
Amar

Hello Amar,

thank you for your answer. I checked the versions of CODESYS Development System V3 and CODESYS Control for Raspberry PI. Both are the same 3.5.16.0..
Do you have an other idea?

Regards
Teefan

Hello Teefan,
Check out this video for some helpful instructions :
https://www.youtube.com/watch?v=jMNYDah5bNA

Tools->Update Raspberry Pi
Install Codesys Runtime package v.3.5.16.0 on RevPi with login credentials.

Use RevPiLib With CODESYS V3.5 SP16 found on this forum topic.
RevPiLib CodesysV3.5 SP16-Beta-Test version.zip file
Link: viewtopic.php?f=6&t=1979&p=7788&hilit=codesys#p7788

Regards,
Amar

Hello Amar,
there are still two problem:
A) the missing RevPi in the Tool-->device reader. I can about cmd ping the RevPi but can not find it in Tool-->Device reader. I choose tools-->update raspberry pi manual with tools-->adjust-->....
B) I can not choose the Update raspberry Pi-->Codesys runtime package, because the field is empty. I have under C:\...\Codesysys Control for Raspberry Pi\... no .deb file, too.
In package manager-->package Raspberry Pi is installed.

Best regards
Teefan

Hello Teefan,
CODESYS Control for Raspberry PI 3.5.16.0 is an archive file.
You can Extract this file and point to the deb file under Delivery folder as the Package Directory.
With Login credentials, you need to browse and point to the deb file in Package directory.Clicking Install will shall install codesys runtime with "codesyscontrol_arm_raspberry_V3.5.16.0.deb" on Rev Pi.
Then you can cross check with System Info if Codesys Runtime has started on RevPi.

Also Check in Package Manager if you have the packages installed.
Regards,Amar

Hello Amar,

thank you for your whole answers, but in my Codesys archiv file is no folder "Delivery" (and so no .deb file). I have only following three folders: Devices, Examples, Libaries.
I still ask Codesys (3S) about the missing folder. Do you have an other idea?

Best regards

Teefan

Hi Teefan,
You might have some corrupted archive.The version download from codesys website from the following link has the .deb file included.
https://store.codesys.com/codesys-contr ... 20versions

Regards,
Amar