Page 1 of 1

DO module: Detecting open load

Posted: 28 Mar 2020, 00:13
by aharrah
The page describing the I/O modules mentions:
Each output can additionally be configured to detect open load conditions when in high side switch mode and send an alarm to RevPi Core.
How do I read or get notified of the alarm when there is an open load condition?

Thanks,
Andy

Re: DO module: Detecting open load

Posted: 01 Apr 2020, 12:33
by dirk
Hi aharrah,
you have to read out the variable "OutputOpenLoadDetect", i.e. by "piTest -r <variable>".
Have a look at this tutorial How to Configure Digital I/O Modules

Re: DO module: Detecting open load

Posted: 01 Apr 2020, 17:05
by aharrah
That page had some good information on it.

After configuring OutputOpenLoadDetection how do I check to see if there is an open load on an output?

In digging a little bit I did come across this page: https://revolution.kunbus.com/tutorials ... iguration/ which includes the following:
OutputOpenLoadDetection has not yet been put into practice.
Is this a still a true statement?

Thanks,
Andy

Re: DO module: Detecting open load

Posted: 30 Jun 2020, 16:34
by dirk
Hi Andy, we have updated our documentation. The feature is working and the description how is available here:
https://revolution.kunbus.com/tutorials ... iguration/